The KENTOP SH-800DL-800 is an 800 mm remote control tracked tank lawn mower developed for demanding vegetation maintenance on slopes, wet fields, rough ground and large green areas. Its wide tracked chassis, crawler layout and gasoline-powered cutting system are intended to provide stronger traction, stability and working capacity than compact 550 mm models.
For machinery distributors, agricultural equipment importers and project contractors, the SH-800DL-800 offers a larger cutting width, higher reference working efficiency and a robust tank-style undercarriage. Remote travel and cutting control allow the operator to work from a safer observation position. Engine, battery, control, starting and accessory configurations should be confirmed with KENTOP before each order.
Product Gallery
Key Features
- 800 mm cutting width: covers more ground per pass for farms, solar parks, estates and municipal maintenance.
- Tank-style tracked chassis: wide engineering rubber tracks support grip and balance on uneven ground.
- Remote control: reference control distance up to approximately 500 m in suitable open conditions.
- Higher travel speed: reference range of 0-6 km/h helps move efficiently between working areas.
- Electric starting: the supplied technical sheet lists standard electric starting for this model.
- Adjustable cutting height: approximately 10-200 mm, with manual or electric adjustment depending on configuration.
- Heavy-duty construction: reinforced track components, protective frame and manganese-steel cutting components are shown in the supplied material.
Technical Specifications
| Model | SH-800DL-800 |
|---|---|
| Machine Type | Remote control tracked tank lawn mower |
| Cutting Width | 800 mm |
| Cutting Height | Approximately 10-200 mm; manual or electric adjustment depending on configuration |
| Power Source | Hybrid fuel-electric system with dual power generation shown in supplied material |
| Reference Engine Power | 16 hp gasoline-powered configuration |
| Generator System | Reference 2,500 W brushless generator system |
| Drive System | Independent tracked drive with integrated transmission |
| Starting Method | Standard electric starting shown in supplied material |
| Reference Climbing Capacity | Up to approximately 60 degrees under suitable tested conditions; actual safe limit depends on terrain |
| Remote Control Distance | Up to approximately 500 m in suitable open conditions |
| Travel Speed | 0-6 km/h |
| Reference Working Efficiency | Up to approximately 4,800 m²/h depending on terrain and vegetation |
| Fuel Tank Capacity | 9 L |
| Oil Capacity | Reference 1.6 L / 1.6 L according to supplied configuration sheet |
| Reference Maximum Fuel Consumption | Approximately 4-5.2 L/h depending on engine and load |
| Overall Dimensions | 1450 × 1330 × 700 mm |
| Net Weight | Approximately 300 kg |
Specifications are based on customer-supplied technical material. Engine brand, electrical system, controls, dimensions and performance can change with configuration. Request the latest confirmed technical sheet before purchase.
Applications
The SH-800DL-800 is suited to repeated mowing and vegetation control across large farms, orchard access areas, solar installations, industrial sites, reservoirs, estates and municipal green spaces. The 800 mm deck can improve coverage where compact machines require too many passes. The tracked layout can support work on uneven, damp or rocky ground when surface conditions are assessed properly.
Remote operation helps the user maintain distance from the cutting deck, but it does not eliminate the need for safe procedures. Operators must keep the machine in clear view, establish an exclusion zone and inspect the site for wire, stones, holes, people and animals. Reference slope figures are test values, not a universal safe limit. Actual suitability depends on grip, slope direction, soil stability, vegetation and machine configuration.
Tracked Tank Chassis and Cutting System
The tank-style undercarriage distributes weight through broad tracks and is designed to provide grip and balance on sloped or irregular surfaces. Reinforced track components and the protective front frame help support demanding field use. The cutting system uses heavy-duty rotating blades intended for grass and dense vegetation. Blade condition, guards, belt tension and the underside of the cutting chamber should be checked regularly.
Operation and Maintenance
- Inspect tracks, fasteners, blades, guards, wiring and fluid levels before every shift.
- Test remote travel, emergency stop and cutting controls before entering the work area.
- Select a cutting height and speed suitable for the vegetation density and ground condition.
- Avoid sudden turns on steep, wet or unstable slopes.
- Stop the engine and isolate power before cleaning or servicing the cutting chamber.
- Follow the confirmed engine and machine maintenance schedules and keep recommended spare parts available.
For Distributors, Importers and OEM Buyers
KENTOP supports overseas distributors, machinery importers and project buyers with export-oriented product coordination. Available cooperation may include logo application, selected colors, export packaging, operating manuals and spare-parts preparation. Final OEM scope, minimum order quantity, production schedule and market documents should be agreed before production.
For an accurate quotation, provide your company name, destination country, expected quantity, typical terrain, vegetation type, slope conditions and preferred engine or branding configuration. KENTOP can then confirm the current specification, packaging method and spare-parts recommendation.
Frequently Asked Questions
What type of work is the SH-800DL-800 designed for?
It is designed for larger vegetation maintenance jobs requiring an 800 mm cutting width, tracked traction and remote operation on uneven or sloped sites.
Can it work on steep slopes?
The supplied sheet lists a reference climbing capability up to approximately 60 degrees under suitable conditions. Safe use depends on grip, slope direction, obstacles, soil stability and configuration, so a site assessment is essential.
How far can the mower be controlled?
The reference remote distance is up to approximately 500 m in suitable open conditions. Terrain, trees, buildings and radio interference can reduce practical range. Maintain visual contact at all times.
What information is needed for a quotation?
Please provide country, quantity, application, terrain, vegetation density, slope conditions and required OEM options.
Does KENTOP supply spare parts and OEM branding?
Spare-parts preparation and OEM labels, colors, packaging or documentation may be available depending on the order scope and quantity.
Request a Quote
Contact the KENTOP export team for the latest SH-800DL-800 configuration, technical sheet, spare-parts recommendation, packaging details and quotation. Email sales@kentopmach.com or WhatsApp +86 131 5385 9554.